Edge Skid in a Wedge XC700 chassis

[snosnake]

A friend of mine would like to upgrade his XTRA-10 suspension in his XC700 to an Edge Skid. Has anyone done this conversion? Will the bolt holes line up? Please let me know if anyone has experience with this conversion. Thank you!

[rp7x]

you will need to move the rear brackets

[indy_500]

i'm pretty sure the bolt holes won't line up. i was about to put an edge skid in my 99 indy 500 (evolved chassis) and the bolt holes didn't line up so i threw that idea out the door. if he's looking for a taller look, you could always get rear suspension hangers that raise the suspension. because the suspension in his xc 700 isn't that bad, it just doesn't have much clearance.

[indy_500]

here is the rear suspension hangers

http://www.johndee.com/discuss/messages/6/115885.jpg

[indy_500]

i found these ones for $40 at www.firstplaceparts.com (http://www.firstplaceparts.com)