PDA

View Full Version : Suspension for 95 Polaris RXL EFI



emt647
10-29-2009, 08:56 PM
Any recommendations on a better suspension for a 95 Polaris RXL. The stock one is killing me and a new sled is not in the budget.

xcr800
10-29-2009, 09:38 PM
If it has the xtra 10 suspension I would look to getting the xtra 12 suspension and installing that much better ride or just get an M10 suspension and install that.

emt647
10-29-2009, 09:44 PM
xcr800 Any idea on what the xtra 12 would cost?

xcr800
10-29-2009, 10:34 PM
I bought one on ebay for $150.00 bucks plus shipping. The M10 is much better but cost around $1500.00 new but you can find them on ebay much cheaper used.

rp7x
10-30-2009, 03:57 AM
put a edge in it

rjsledworks
10-30-2009, 10:43 AM
emt647, Your '95 RXL already has the extra 12, it must need some work(shocks, springs, seized shafts, etc.)

whitedust
10-30-2009, 11:24 AM
Try to stay with your current suspension. You will be lucky to keep the electronics of the RXL running. I would think parts would also be difficult to get for that Poo version of EFI & very expensive. Good luck but save your money on that sled ...never get it back. Problems with RXL EFI very well known....too many darn wires.

indy_500
10-30-2009, 11:39 AM
i agree with whitedust.

vw56german
10-30-2009, 02:38 PM
^^^^^^^^^^^^ Has some left over RXL parts.

vw56german
10-30-2009, 03:52 PM
ooops double clutched

emt647
10-30-2009, 05:59 PM
vw56german you have RXL parts?