Polaris Sportsman 700 Wrench Icon

[snowfish]

How do I remove the Wrench Icon from the gauge display? I just finished a bunch of service on this poor thing. Axle Shafts, Brakes, Oil Change, Plugs, battery, etc. Other than some cosmetic blemishes it runs great. But I can't get the "wrench icon" to turn off.

[landoman]

Try this

- Put ATV in Neutral Key off and wait 10 sec.
- Hold reverse override button and turn key on. - Once you are up you will notice that the screen is V2.1 or something like that.
- Press button repeatedly until you get to the screen with the wrench Press and hold the override button until the wrench disappears.
- Turn key off then back on Problem gone

[snowfish]

Landoman,

Bloody Genius Mate!

Thanks

[bellracing2]

while we have help , how do you set the clock ? 08 sportsman 500 Thanks , Ben

[landoman]

Same way basically....

- Put ATV in Neutral Key off and wait 10 sec.
- Hold reverse override button and turn key on.
- Once you are up you will notice that the screen is V2.1 or something like that.
- Press button repeatedly until you get to the screen with the time.
-Press and hold the override button until the hour flashes
- use the override button to change the hour - then wait until the minutes start flashing and do the same.
- once done with minutes - just let it sit and a bit and the time will stop flashing.

This is off memory so it may be a bit different.