PDA

View Full Version : Shop Cam



bkboats
08-26-2009, 11:58 AM
Thanks for all the emails about the cam. I know it has been down since the loft build. It is back up and running. Like you all asked, I will keep you posted on scheduled events.

www.bkboatnsleds.com (http://www.bkboatnsleds.com) for the feed.

Live boat parting today at 12pm central.

zaskar
08-26-2009, 07:55 PM
still not working...

bkboats
08-26-2009, 09:08 PM
I have the cam plugged into a switch at the moment. I have to plug it in a different outlet. Thanks for checking it out today folks!

marty700
08-27-2009, 04:00 PM
Still not working.

microman
08-27-2009, 04:41 PM
Seein' some young guy in a black tee, moving stuff around...Polaris Edge is center frame.

I did have to install an ActiveX control for this to work correctly.

MM

bkboats
08-28-2009, 03:57 PM
Cody is parting a 75hp Johnson at 2pm central

bkboats
09-01-2009, 08:02 AM
Starting a barrel drum BBQ at 8.30 am (central)

brapmaster
09-02-2009, 01:43 PM
I still can't make it work, bummer

Cal

jim
09-03-2009, 11:58 AM
most of the time i try, i can't get connected either!

gostman07
09-03-2009, 12:14 PM
Doesn't work for me either.

bkboats
09-03-2009, 04:14 PM
We have a 2001 polaris edge 550 super sport getting parted today...2-5 pm central. The cam is plugged in better so the cam will be live at all times..

Doug

bkboats
09-04-2009, 05:09 PM
Gonna fire up the 500cc polaris GOLF CART in a few minutes...

bkboats
09-08-2009, 05:08 PM
Late 80's polaris getting parted 3-5 pm

bkboats
09-09-2009, 03:35 PM
500cc golf cart gets some work done to it... www.bkboatnsleds.com (http://www.bkboatnsleds.com) for the feed

catdog
09-09-2009, 04:09 PM
I can not view cam, says link can not be found

acase27
09-09-2009, 08:32 PM
Works good for me! Just a golf cart, no people though.

bkboats
09-22-2009, 02:39 PM
Dismantling a boat to please the sled gods!! Now until 3pm.... www.bkboatnsleds.com (http://www.bkboatnsleds.com)

bkboats
09-28-2009, 04:32 PM
1995 XLT getting parted at 3pm central till 6pm

bkboats
09-29-2009, 04:31 PM
The XLT continues...up next is a 2004 Arctic Cat Panther 2 up.

Today 2pm - 5pm

bkboats
10-01-2009, 09:44 AM
Change in plans.... 1998 Yamaha Vmax 500 is coming apart today at 2.30 pm (central)

bkboats
10-05-2009, 05:08 PM
Today is a early 90's Polaris Indy 500. Today at 3 pm

bkboats
10-08-2009, 11:57 AM
A very random mix in the shop today....check out the machines that we have...

bkboats
10-14-2009, 04:55 PM
Filming of the New "I am a Ditch Banger" commercial can be seen today on the webcam. 3-5 pm

bkboats
10-19-2009, 03:34 PM
Pulling the 305 motor out of the Bk Cruiser for the next hour or so.

bkboats
10-19-2009, 05:57 PM
now messing with 2 evolved polaris sleds.

bkboats
10-20-2009, 03:46 PM
Indy Lite is getting parted... 1.30pm-5pm Anyone have one of these? lol www.bkboatnsleds.com (http://www.bkboatnsleds.com)

bkboats
10-22-2009, 02:25 PM
evolved indy getting parted. 12.30-??

jmpsly
10-22-2009, 06:35 PM
You had better take ff those sandels and put on steel toes before you drop something on your foot.

bkboats
10-23-2009, 01:50 PM
trying to get a mid nineties skidoo running today.

bkboats
10-23-2009, 02:06 PM
it runs....now it goes to parts. 12pm central till 2.

bkboats
11-03-2009, 04:07 PM
2 1997 Ultras are coming apart right now.

bkboats
11-09-2009, 01:12 PM
Our New Monday update... Be the first to know. www.bkboat.blogspot.com (http://www.bkboat.blogspot.com)

bkboats
11-09-2009, 04:27 PM
97 Polaris Ultra is coming apart 2.30-5.

Triple SLP pipes...sold
Track....sold

BEFORE IT WAS PARTED! lol

fire126
11-09-2009, 06:07 PM
You need to get him a sled lift.LOL Get more work done less back problems.

bkboats
11-09-2009, 06:11 PM
I HAVE ONE!! lol The damn kids don't use it.

You can see it leanin' up on the workbench..lol

brapmaster
11-10-2009, 08:53 AM
Man I wish I could pull this cam up. Maybe just the filters at work.

Cal

bkboats
11-10-2009, 06:01 PM
The Ultra is getting finished off... 4-5 pm.

We are working on live chat during these times too... I will keep you posted.

michaeladams
11-10-2009, 06:55 PM
sounds like you need a new information tech tech

bkboats
11-16-2009, 12:47 PM
Here is the wrecked 2005 F5 that came in over the weekend.. www.bkboatnsleds.com (http://www.bkboatnsleds.com)

bkboats
11-16-2009, 04:47 PM
Monday update: http://bkboat.blogspot.com/

bkboats
11-16-2009, 05:27 PM
xcr is almost done...there wasnt much to start with though. lol 3pm-4.30

fire126
11-16-2009, 06:41 PM
Nice update,look forward to seeing the bill board.

Think Snow!!!
Live The Dream!!!

bkboats
11-19-2009, 05:09 PM
1990's Phazer II is getting parted live right now... the track and pipe have already been sold!

www.bkboatnsleds.com (http://www.bkboatnsleds.com)

bkboats
11-23-2009, 11:23 PM
Monday Update! http://www.bkboat.blogspot.com/

bkboats
11-24-2009, 04:06 PM
1996 Yami Vmax 600 XT is getting parted right now! until 5 pm today www.bkboatnsleds.com (http://www.bkboatnsleds.com)

bkboats
11-30-2009, 10:23 PM
It's monday...time for an update. Some big news this time! http://bkboat.blogspot.com/

bkboats
12-04-2009, 12:48 AM
Where do you want the webcam for the swap meet on sunday? In the 1200sf swap area, the shop as usual, or outside in the sled show/swap area?

Voice your opinion, it's YOUR CAM!!

bkboats
12-08-2009, 04:16 PM
2000 ZR 600 with M-10 and PSI twin pipes.... coming apart today. 2-5 pm

live @ www.bkboatnsleds.com

bkboats
12-09-2009, 08:18 AM
The new update video for the week... some big ideas coming

@ http://tiny.cc/bk307

bkboats
12-11-2009, 11:03 AM
It's friday so we are gonna have some fun with the shop cam and overhead flat screen in the shop. If you are on Facebook, join us @ http://tiny.cc/DitchBanger to talk directly with the guys in the shop. The conversation on that link above will be broadcast on the flat screen at the shop. Don't believe us? Ask Us to do something on the webcam.... www.bkboatnsleds.com The flat screen is just out of the webcam's view. It is dead center just above the eBay photo booth.

Have a good Friday and come kill some time with us online!

bkboats
12-12-2009, 05:39 PM
Getting some chevy Tahoe Parts listed before the sled customers get too restless!

www.bkboatnsleds.com for cam.

bkboats
12-14-2009, 10:49 PM
New update with a SMASHING ending.... http://tiny.cc/N3vIA

bkboats
12-21-2009, 10:50 PM
New update with a deal on sled dollies... the NICE ones... http://tiny.cc/bk135

bkboats
12-24-2009, 03:10 PM
Building a radio flyer wagon for "santa" .. www.bkboatnsleds.com for cam feed 1.15-2pm

bkboats
12-29-2009, 11:01 AM
Last update of the year! http://tinyurl.com/yhclqsy

bkboats
12-30-2009, 12:55 AM
A very weird call came in today.... http://bkboat.blogspot.com/2009/12/iphone-bk-webcam.html

frnash
12-30-2009, 01:00 PM
A very weird call came in today…

"It started with the caller saying, 'This is going to be weird, but bare with me…'"
Careful, sounds like a possible pervert! {grin}
(Don'cha just love "fun with language"?)

bkboats
01-02-2010, 09:15 PM
Yeah I guess there is a HUGE difference there..lol!

bkboats
01-04-2010, 10:00 PM
First Monday update of the Year! Charity, Swap, and Maintenance Class.

http://tiny.cc/pHde1

bkboats
01-07-2010, 07:35 PM
BK university will be LIVE tonight on the webcam from 6.30-8.30 central.

Cam link ------> http://tiny.cc/QctJq

bkboats
01-09-2010, 02:23 PM
We had a sled gang show up at the shop...... http://tiny.cc/sledheads

bkboats
01-13-2010, 11:43 PM
The shop is too full!! check out the cam tonight.. the shop looks like that, front to back...
http://bkboats.com/web-cam-chat/

bkboats
01-14-2010, 11:13 PM
I am at the shop late tonight.... any webcam stunt suggestions?

bkboats
01-15-2010, 12:59 PM
pulling customer requests today... skidoo arms and polaris parts. I will be out there for a while!